How can I set a No-go zone on my Jet Bot?
Samsung Jet Bot and Jet Bot AI+ are able to distinguishing between areas that need cleaning and areas that don't want cleaning.
Make restricted areas in your home
You can designate specific areas that you want your robot to avoid, called No-go zones, which can set for various reasons. It can be set for areas where your Jet Bot tends to get stuck with cables, clothing, or kids' toys. You can restrict some areas for your pet. You can also use this feature to avoid entire rooms.
Based on deep learning AI technology with 3D sensors, Jet Bot has a database of more than 1 million images to recognizes various objects. With these excellent object recognition capabilities, Jet Bot cleans around various objects such as furniture and home appliances as closely as possible and avoids dangerous obstacles such as pets' droppings and glasses. Moreover, Jet Bot can select and clean in the most optimal route according to its environment based on its LiDAR sensor similar to that used for self-driving cars. These efficient technologies let you can divide and select your home area in more detail.
Once you've created the restriction areas, Jet Bot will remember them for future cleaning sessions so you don't need to reset them. At any point, you can go back into the SmartThings app to create, delete or adjust any of your restriction areas.
Note:
- This feature is available on the SmartThings app and Android iOS operating system.
- We recommended Android 6.0 or higher (minimum 2GB RAM space), iOS 10.0 or higher, and iPhone 6 or higher to operate the SmartThings app.
- This feature requires a Wi-Fi router and also connection to the Wi-Fi.
Setting a restricted area with SmartThings
To use the No-go zone feature, Jet Bot needs to map your home on the SmartThings app. Once Jet Bot has connected with SmartThings app, you can easily control your appliance using your smartphone and tablet.
If you need more information about how to connect to Jet Bot using SmartThings app on your smartphone through the 'How can I connect my Jet Bot to SmartThings?'
Step 1. Open the SmartThings app and connect to the Vacuum Cleaner (Robot).
Note:
- The Clean station cannot be set as a No-go Zone.
- If the Jet Bot does not start from the Clean Station or the Clean Station installation place has been changed, the Jet Bot may clean the set No-go Zones.
- Furniture which has space at the bottom (a cabinet, a sofa, etc.)
- Around a fireplace
- A floor less than 5 cm (0.59~1.96 inch) of height difference (a bathroom, a porch, etc.)
- A carpet with fiber longer than 2.5 cm (0.98 inch)
- A personal area that you wish the device would not enter.
Using Boundary strips
Attach the boundary strips to the places that you want to keep the Jet Bot away. Select the spots where the risk of falling, steps, or furniture. These tapes will help the Jet Bot can operate safely.
Note: You can purchase the Boundary strips additionally at a service center.
Correct location to attach Boundary strips
- Place the tape where the step is 5cm or lower.
- Place the tape where the door sill is 1.5cm or higher.
- Avoid a slide, swing, pots, heater/fireplace, spots with fire or moisture.
- Avoid places where there is risk of falling, such as stairs, porch, or railing.
How to set a Boundary strips
Place the boundary strips 15cm away from the spot to avoid and attach in a 'ㄷ' shape.
Note:
- Available technologies and functions may vary depending on the country, service provider, network environment, or product.
- Before you try out the app connection, be sure to check if your device's software and related apps are updated to the latest version.
- Mobile screen images on this content may vary depending on the device model you have.
Thank you for your feedback!
Please answer all questions.
RC01_Static Content : This text is only displayed on the editor page